Skip to content

T8 4ft LED Tube/Bulb - Glass 18W 1800 Lumens 5000K Clear, G13 Base, Single Ended power - Ballast Bypass - 15 Pack

Skip to product information
1 of 21

T8 4ft LED Tube/Bulb - Glass 18W 1800 Lumens 5000K Clear, G13 Base, Single Ended power - Ballast Bypass - 15 Pack

Regular Price: $99.85
$59.85
Save $40.00 (41%)
$3.99Ea.
  • 30 Days Return
  • 3 Years Warranty
Trim: Clear CCT: 5000K
sizes: 15 Pack

4ft. LED Tube Glass 1800 Lumens - 18 Watt - 50W Equivalent - LED Tube Glass - 5000 Kelvin - Clear - Single Ended Power - 4FT LED Light Bulbs

The 4ft. LED tube glass of 18W available in 5000K color temperature and having a CRI of >80  can deliver lumens up to 1800. It is an excellent substitute for T8, T10 & T12 fluorescent tubes. This 18W can safely and easily replace fluorescent tube of 50W and bring an energy-savings of 32W. Thus, a lower utility bill for you every month. This 18W will work without a ballast, hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. These 18W LED tubes are housed in rugged die-cast aluminium for an efficient heat dissipation. For the standard ceiling height, these LED tubes having a beam angle of >220 degree emit enough bright light, have a long lifespan and have a shatterproof coating, unlike the fluorescent tubes that were of inferior light quality, typically low lifespan and usually with no shatterproofing.
 

1800
Lumens
>50,000
Hours
>220°
Beam Angle
120-277
Voltage
18
Watt

Features of T8 4ft 18W LED Tube Glass 5000K Clear Single Ended power

  • Available Wattage: 18 Watt
  • Color Temperature: 5000K
  • Luminous Flux: 1800 lumens
  • Wattage Equivalent: 50W
  • Lifespan - 50,000 hours
  • Ballast Bypass [Works without a ballast]
  • Voltage: 120V - 277V
  • cULus Approved 
  • 3 years  of Manufacturer's Warranty

Ballast Bypass

This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.

 

Flicker Free

Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound. 

Voltage Input

The LED tubes accepts an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.

Low Maintenance Cost

The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.    
 

>50,000 Life Hours

The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.  
 

CRI >80

The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light. 

220 Degree Beam Angle

All our LED tubes which come in glass have a 220-degree beam angle. This beam angle is used for very huge spaces and wider areas.  

Designed especially for applications where need a wide lighting area.L06G-V long lifetime and low lumen depreciation reducing the maintenance costs due to L06G-V slim aluminum form, optical and driver integrated.
 

Energy Saving

The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.       
 

Aluminium Heat Sink

The LED tubes have a big heat sink made of aluminium and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.   
 

LED Chip

Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.

Tube Installation

Specifications

Base Type: G13
Brand: LEDMyPlace
Color Rendering Index(CRI): >80 CRI
Dimensions (L x W x H): 47.76*1.02*1.02
Fixture: Yes
IP Rating: IP20 Rated
Life Hours: >50,000 Hours
MPN (Part No.): TB009
SKU: WEN-T8GB1218T-50-A.1pk
Voltage: 120-277 Volt
Wattage: 18 Watt
Operating Temperature: -4 Degree F To +113 Degree F
Beam Angle: >220° Beam Angle
Certifications: UL Listed
Color Temperature (Kelvin): 5000 Kelvin
Dimmable: Non-dim
Housing: Glass
LED Type: SMD LEDs
Lumens: 1800 Lumens
Replaces Fluorescent : 50 W
UPC: 719034337043
Warranty: 3 Years
Weight: 0.2 lbs

Product Review

Questions & Answers

Ask a Question
  • When you use your LED bulb and remove the ballast do the tombstones need to shunted or non-shunted to operate correctly?

    These tubes will need non-shunted tombstones!

  • Do you need to change the light fixture when using LED T8 4ft Tube Glass from florescent T8 4ft tube?

    These tubes will replace any T8 or T12 tube but since they're single-ended power, they need to be wired with Hot and Neutral on one side only once you remove your exisitng ballast in the fixture. Then you add a non-shunted tombstone to that wired side. The other side doesn't get wired.

  • What is a non shunted tombstone?

    It's a socket, or lampholder, with 2 separate points of contact for 2 different currents to flow. So one is ended when wiring Single-Ended Power tubes (as you selected,) because you wire Hot and Neutral to one side only, and add that non-shunted tombstone to that wired side. What that does it allows Hot wire to feed into one hole, Neutral wire into other hole, since they're seprate currents.

  • Will these bulbs cause FM radio interference?

    We have no way of knowing for sure. But this has happened in rare instances. Most of the time if the customer moves the radio, it corrects the problem.

  • What is a G30?

    G30 bulb is 30mm in diameter