
T8 4ft LED Tube/Bulb - 22W 3000 Lumens 6500K Clear, 2-Row, G13 Base, Double Ended Power - Ballast Bypass
1-Pack
- translation missing: en.products.product.sale_price
- $7.09
LEDMyplace presents a 22-watt two-row dual-ended LED tube that has a clear housing. This four feet LED tube is energy efficient and is a perfect retrofit for T8, T10, or T12 tubes. Having a long life this tube will run for more than 50,000 hours which means that you won't have to worry about your tube for at least half a decade. The beam angle of these tubes is 120 degrees and these have a clear or frosted cover. These 22 watt LED tubes replace 80-watt fluorescents which means that by installing these tubes you will be saving energy worth 58 watts per hour for as long as you use these lights. These tube lights have an IP rating of 44 which means that these lights are protected from dust and materials larger than 1mm.
Features T8 4ft 22W LED Tube, 2-Row LED Tube, 6500K Clear Dual-Ended Power:
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The color rendering index of these tubes is 80 which means that the colors displayed by these tubes are 80% accurate when compared to daylight.
The LED tubes that are either clear or frosted have an IP44 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
Because of the long life and high-efficiency these tubes need little or no maintenance bringing down the cost of maintenance.
These tubes have a manufacturer's warranty of five years so that you won't have to worry about your tube light for at least half a decade.
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
The 120 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 degree beam angle.
The LED tubes have a big heat sink made of aluminium and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for rebate.
Base Type: | G13 |
Brand: | LEDMyplace |
Color Rendering Index(CRI): | >80 CRI |
Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 |
Life Hours: | 50,000 Hours |
MPN (Part No.): | TB070 |
SKU: | WEN-T8-4FT-2RW-22WC6500K |
Warranty: | 5 Years |
Operating Temperature: | -4 Degree F To +113 Degree F |
Beam Angle: | 120° Beam Angle |
Certifications: | ETL Listed |
Color Temperature (Kelvin): | 6500 Kelvin |
IP Rating: | IP44 Rated |
Lumens: | 3000 Lumens |
Replaces: | 80 Watt Replacement |
Voltage: | 100-277 Volt |
Wattage: | 22 Watt |
Can these lights work on t5 fixtures?
I am sorry to inform you that these lights will work in T5 fixture because it altogether a different fixture.
Are they dimable?
No, unfortunately they are not dimmable.
Are these glass
No, these are poly aluminum tubes.
are they “ballast compatible”? ie: can i use your led tubes to replace fluorescent tubes without extra parts/modifying the fixture?
No, These lights are ballast bypass
How many could you put on one run?
You can only run one tube per fixture.
is 1 pack is that 2 tube.
1 pack has 1 tube.