Skip to content

T8 4ft Integrated LED Tube Light 22W V Shape 2 Row 6500K Clear, Linkable, Plug and Play, 4ft LED Shop Light - 1pc

Skip to product information
1 of 16

T8 4ft Integrated LED Tube Light 22W V Shape 2 Row 6500K Clear, Linkable, Plug and Play, 4ft LED Shop Light - 1pc

Regular Price:
$13.99
  • 30 Days Return
  • 5 Years Warranty
Wattage: 22W CCT: 6500K
Size: 1pc

T8 4 ft. LED Tube/Shop Lights - 2640 Lumens - 22 Watt -80W Equivalent - 6500 Kelvin - V Shape LED Integrated - 2 Row

Shop for 4ft T8 LED V Shape Integrated Tube which is 22 wattages. The tube has two rows and comes in 6500 Kelvin color temperature. This tube light has a lumen output of 120 Lumens per watt and has a rated operational life of more than 50,000 hours. This means that these lights will last for more than 5.7 years even if used for 24 hours of the day. The lights have a high color rendering index of more than 80 which means that these lights render colors that are accurate in comparison with an ideal light source such as daylight.

80
Watt Replacement
2640
Lumens
50,000
Hours
180°
Beam Angle
100-277
Voltage

Features of 4 Feet T8 LED Tube 22 Watt - 6500 Kelvin:

  • Wattage: 22W
  • Color Temperature: 6500K
  • Lumens: 2640
  • IP Rating: IP40
  • Beam angle: 180°
  • Cover: Clear
  • Lifespan - 50,000 hours
  • 5 years of Manufacturer's Warranty

Operating Temperature 

The Operating Temperature of these LED Integrated Tubes is -4°F to 104°F which is -20°C to 40°C. These LED Integrated Tubes to perform very well in these temperatures.

Easy to Plug and Play

Our T8 4ft integrated tube doesn’t require any ballast unlike in case of a fluorescent tube when such tube required removing of the ballast and which took a substantial amount of resources both in terms of labor and time. Earlier, it was often easier to install a new 4ft integrated tube than to retrofit the fluorescent tube when you struggled with the issue of ballast compatibility.
 

Easy to Plug and Play

Flicker Free

With fluorescent tubes, you often encountered the problem of flickering on a consistent basis and then you helplessly tried to fix it in some or the other way, sometimes by fixing the loose tube in its place, at other times, replacing the starter. Fortunately, this isn’t the case with our T8 4 ft LED integrated tubes. Our 4ft integrated tube is completely flicker-free since it operates without any starter and thus this tube is a time-saving lighting product when you can safely rely on it without your regular activity getting disrupted.  

Flicker Free

Voltage Input

Our T8 4ft LED integrated tube accepts an input voltage of AC 100-250. With an LED driver inside the tube that can adjust according to the incoming voltage to provide the current supply, this voltage range allows you to directly wire the fixture without making any modifications.

Low Maintenance Cost

With our T8 4ft integrated tube lasting for not less than 50,000 hours and with very little lumen depreciation until the end of lifespan, you incur no cost or almost negligible maintenance cost.

Low Maintenance Cost

>50,000 Life Hours

Our T8 4 ft integrated tube by all means are built to last for more than 50,000 hours, thanks to the innovators of LED technology.

>50,000 Life Hours

CRI >80

The CRI being 80 for integrated tube means it enables objects and spaces to display their true colors to 80% extent and this is what makes it suitable to different applications. 

CRI >80
High CRI 80+

180 Degree Beam Angle

The integrated tube having this wide beam angle can be used for general area lighting and for illuminating large areas. For integrated tubes installed in low ceiling rooms, this beam angle is perfect. 

180 Degree Beam Angle

Energy Saving

The integrated tubes by all means do not bring any less than 75% savings in energy when making a switch from fluorescent tube to this tube. 
 

Energy Saving
Energy Saving

Aluminium Heat Sink

The heat sink allows our T8 4ft integrated tube to dissipate any heat produced by the tube. This heat sink made of aluminium is light weight and a good thermal conductor. 
 

Aluminium Heat Sink

Easy Installation

T8 8ft LED Integrated tube is a linkable integrated fixture and can be linked using a linkable connector directly. During installation, you will find two white cables for L or N and yellow for the ground; using these wires also integrated tubes can get connected. You can mount this fixture by placing the clip kits and screws correctly. Then fix the tube to the ceiling or wall. Once you get done with the tube fixing, connect the power cord (Sold Separately) to the tube.

IP 40 Rated

Our integrated tube is rated IP40 indicating that the tube is protected against any dust particles with thickness greater than 1mm and any moisture or water coming from any direction. This makes our tubes suitable even for those indoor areas where there are chances of penetration of water such as bathrooms, kitchens, etc.

LED Chip

LEDMyPlace uses LED chip of highest grade, made available to us through the largest manufacturer of LEDs -- Epistar Corporation. The LED chip being manufactured out of high quality materials is durable, low heat generating and eco-friendly with a long service life.    
 

Specifications

Dimensions (L x W x H): 47.56''x1.22"x1.55"
Beam Angle: 180° Beam Angle
Certifications: ETL Listed
Color Temperature (Kelvin): 6500 Kelvin
Dimensions (L x W x H): 47.56''x1.22"x1.55"
Housing: Aluminum
LED Type: 2835
Lumens: 2640 Lumens
Power Factor: >0.90
SKU: WEN-4FT-INT-22W-6500K-C
Warranty: 5 Years
Base Type: Integrated
Brand: LEDMyplace
Color Rendering Index(CRI): >80 CRI
Damp Location: Damp Location
DLC Listed: No
IP Rating: IP40 Rated
Life Hours: 50,000 Hours
MPN (Part No.): IT011
Replaces: 80 Watt Replacement
Voltage: 100-277 Volt
Wattage: 22 Watt

Product Review

Questions & Answers

Ask a Question
  • Are they hard wired or plugged fixtures?

    They get hard-wired into your power supply but we do offer a 6FT Power Cord for sale for these and the 60W tubes.

  • Are they dimmable ?

    Unfortunately, they are not dimmable.

  • does the wire come with the 4ft lights

    Each integrated tube (22W and 60W,) come with a set of connecting clips, a 1ft connecting cable, and a 13in pigtail for hard-wiring.

  • Many integrated LED tubes use internal switching power supplies that create significant RF interference that disrupts other devices such as radios, TVs, and garage door openers. Do these LED Tube fixtures have any verified evidence of compliance with US FCC RF emission limits? The posted specifications are otherwise rather comprehensive.

    No, they do not but we never get complaints about RF interference. 
    If you have any other questions please reach us at info@ledmyplace.com

  • Can the 4ft versions be direct linked to the larger 8 ft versions to make 16ft? Or should you link only 3 4ft versions together?

    Yes, you can link the 8ft 60W and 4ft 22W integrated tubes.

  • How many 4'er's can been linked together at a time

    You can link upto 4 tubes together with one single power source.