T8 4ft Integrated LED Tube Light 22W V Shape 2 Row 5000K Clear, Plug and Play, Linkable 4ft LED Shop Light
- Translation missing: en.products.product.sale_price
Illuminate the residential and commercial indoors with this 22 Watt 4ft T8 integrated LED tube light bulb. This indoor lighting option is suitable for homes, offices, hospitals, shops, workshops, and other indoor premises. The light is highly efficient when it comes to performance. Its 5000K color temperature is ideal for dispersing daylight white light. In addition, this is an IP40-rated 4ft LED shop light that will be sufficient for placing in locations with moisture content.
Moreover, the brightness of this LED tube light has a wide reach, as it comes with a 180 degrees beam angle illumination. Adding on, this is an energy-efficient LED light tube that is equivalent to an 80 Watt conventional light. Furthermore, this clear 4ft T8 integrated LED tube light bulb will not flicker or dim after a while, as it has a lifespan of 50,000 hours. Also, this linkable LED tube light can be extended to 4 add-ons to increase its illumination impact.
Feature of T8 4 Ft. LED Tube - 2640 Lumens - 22Watt - 80W Equivalent
T8 8ft LED Integrated tube is a linkable integrated fixture and can be linked using a linkable connector directly. During installation, you will find two white cables for L or N and yellow for the ground; using these wires also integrated tubes can get connected. You can mount this fixture by placing the clip kits and screws correctly. Then fix the tube to the ceiling or wall. Once you get done with the tube fixing, connect the power cord (Sold Separately) to the tube.
Our T8 4ft integrated tube doesn’t require any ballast unlike in case of a fluorescent tube when such tube required removing of the ballast and which took a substantial amount of resources both in terms of labor and time. Earlier, it was often easier to install a new 4ft integrated tube than to retrofit the fluorescent tube when you struggled with the issue of ballast compatibility. But, now, with T8 4ft integrated tube, you can heave a sigh of relief as all you need to do is replace the fluorescent tube with our integrated tube by directly wiring it to the line source and without undertaking any step of ballast removal.
With fluorescent tubes, you often encountered the problem of flickering on a consistent basis and then you helplessly tried to fix it in some or the other way, sometimes by fixing the loose tube in its place, at other times, replacing the starter. Fortunately, this isn’t the case with our T8 4 ft LED integrated tubes. Our 4ft integrated tube is completely flicker-free since it operates without any starter and thus this tube is a time-saving lighting product when you can safely rely on it without your regular activity getting disrupted.
Our T8 4ft LED integrated tube accepts an input voltage of AC 100-277V. With an LED driver inside the tube that can adjust according to the incoming voltage to provide the current supply, this voltage range allows you to directly wire the fixture without making any modifications.
With our T8 4ft integrated tube lasting for not less than 50,000 hours and with very little lumen depreciation until the end of lifespan, you incur no cost or almost negligible maintenance cost.
Our T8 4 ft integrated tube by all means are built to last for more than 50,000 hours, thanks to the innovators of LED technology.
The CRI being 80 for integrated tube means it enables objects and spaces to display their true colors to 80% extent and this is what makes it suitable to different applications.
The integrated tube having this wide beam angle can be used for general area lighting and for illuminating large areas. For integrated tubes installed in low ceiling rooms, this beam angle is perfect.
The integrated tubes by all means do not bring any less than 75% savings in energy when making a switch from fluorescent tube to this tube.
The heat sink allows our T8 4ft integrated tube to dissipate any heat produced by the tube. This heat sink made of aluminium is light weight and a good thermal conductor.
Our integrated tube is rated IP40 indicating that the tube is protected against any dust particles with thickness greater than 1mm and any moisture or water coming from any direction. This makes our tubes suitable even for those indoor areas where there are chances of penetration of water such as bathrooms, kitchens etc.
LEDMyPlace uses LED chip of highest grade, made available to us through the largest manufacturer of LEDs -- Epistar Corporation. The LED chip is manufactured out of high-quality materials is durable, low heat generating and eco-friendly with long service life.
The Operating Temperature of these LED Integrated Tubes is -4°F to 104°F which is -20°C to 40°C. These LED Integrated Tubes to perform very well in these temperatures.
|Dimensions (L x W x H):||47.55 x 1.22 x 1.45|
|Beam Angle:||180° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||48|
|Operating Temperature:||-4 Degree F To +104 Degree F|
|Color Rendering Index(CRI):||>80 CRI|
|Damp Location:||Damp Location|
|IP Rating:||IP40 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||IT005|
|Replaces:||80 Watt Replacement|
I just submitted a question without stating the model number related to the question. I am interested in either IT 005 or IT013. The question was: I see that the lights can be connected end to end. I need 3 end to end but the power source would be in the middle of the middle light. Ca power be connected to the middle of a light fixture without being visible from the outside such as running wires around from the end of the end light?
Stephanie Taylor email Today at 12:50 PM
Hello, this tube can't be connected in the middle of the fixture it has a power cord on the end.
Thank you, LEDMyPlace.
Are these dimmable
These are not currently dimmable.
Are the fixtures labeled with a 277volt rating?
Our T8 4ft LED integrated tube accepts an input voltage of AC 100-277V.
Can I plug one of these into a house outlet Can I hook up 3 of these in line on. Thanks
Our T8 4ft LED integrated tube accepts an input voltage of AC 100-277V. Yes you can link upto 4 tubes with one single power source.
Do you have 4'LED tubes that can be linked in a chain and wired to a wall switch? Could the switch be dimmable?
You can link upto 4 of these tubes with one single power source with the help of a pig tail.
Can these be hard wired in to the electricity to be used with a wall light switch?
These bulbs are hard wired only. However, please do install them in presence of a certified electrician.