8ft LED Tube R17D - 6720 Lumens - 48 Watt - 170W Equivalent - 5000 Kelvin - Clear - Ballast Bypass
Out of the LED tube, 8ft can be considered as the brightest LED tube because of its ability to deliver a higher lumen output to serve larger applications and higher energy efficiency than what you get with the other sizes. While our 8ft LED tube is available in 48W, the 48W can deliver a significant amount of 6720 lumens. Having a beam angle of more than 180 degrees, the 8ft LED tube has a 3-4 times longer lifespan than the fluorescent tubes, considering the longest lifespan of any fluorescent tube as 15,000 hours. This 8ft LED tube works without ballast and hence the ballast must be bypassed. With an excellent heat dissipation system, this 8ft LED Tubes is designed to work smoothly and for longer. The 48W 8ft LED tube can replace 170W of any 8ft fluorescent tube and bring about 75% of energy savings.
As ETL, DLC listed product, the 8ft LED tube is high on safety. You have a completely risk-free 5 years of warranty from the manufacturer’s end when you make an 8ft LED tube as your lighting choice.
Features T8 8ft 48w R17D Tube Light 6720 lumens 5000k clear:
- Available Wattage: 48W
- Color Temperature: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 180 degree
- Wattage Equivalent: 170W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC, CE & RoHS approved
- 5 years of Manufacturer's Warranty
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture and water. E.g. Bathrooms, kitchens, etc.
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
180 Degree Beam Angle
The 180 degrees or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 180-degree beam angle.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers of chips to ensure high performance and reliability.
|Color Rendering Index(CRI):||>80 CRI|
|Dimensions (L x W x H):||93.90 x 1.1 9 x 1.30|
|Housing:||Aluminum + pc|
|Light Distribution:||140 Lm/W|
|MPN (Part No.):||TB001|
|Replaces:||170 Watt Replacement|
|Beam Angle:||180° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|Operating Temprature:||-4° F TO +113° F|
Questions & AnswersAsk a Question
Installed 80 HMINLED 4ft LED tune lights 30 days ago. We have had two bulbs go out. What is the process for warranty replacement?
You may reach out to our customer service team for detailed information about the Replacement process.