The 450 watts LED Flood Light with a smooth bronze finish bracket is your perfect outdoor illumination needs. Standard UL and DLC certifications make these fixtures an outstanding choice for sports stadiums. At the same time, also IP65 marked for protection against water or other weather conditions that may damage them over time. The mentioned wattage provides an ideal replacement for traditional fixtures with 1575W. The LED Flood light comes with a photocell sensor for better power consumption and a 20KV surge protector that can withstand power outrages. The LED Flood light comes in a bronze finish and has a lifespan of 50,000 hours.
Features of High Power 450W LED Flood Light with Bracket:
Easy Installation
LED flood lights are a versatile solution for all your outdoor lighting problems. These lights can be installed anywhere around your property. Comes with various mounting options such as flood or yoke mounting, and knuckle mounting. These LED flood lights can be installed in both upward or downward fashion to illuminate your outdoors at different beam angles. Mounting these lights is a simple process enabling you to do an easy and quick installation.
To change the beam angle a user simply has to loosen the thumb-screw, move the fixture onto the desired position, and then retighten the screw.
LED Flood Light comes with an IP65 driver to withstand harsh weather conditions. The lighting fixture can resist ingress of dust, dirt, or water from the water jet. Hence, our outdoor LED flood light can be used in locations where there are chances of dust, dirt, and dampness. Not only does it sustain such harsh and fluctuating environmental condition but is tried and tested to operate under such a condition.
Rugged Construction
LED flood lights have a robust build and simple design. With rugged aluminum casing on the outside, our outdoor LED flood lights are built for durability. These lights can handle wind, dust, moisture, or snow. With a sturdy build and a tested lifespan of 50,000 hours our LED lights are a superior luminaire compared to HID or metal-halide lamps.
Polycarbonate Optics:
Polycarbonate is used as an outer coating for our LED flood light which results in optimal lighting performance and durability. The polycarbonate is responsible for dimensional stability, and high resistance towards external heat and any other impact.
Thermal Heat Dissipation:
For efficient and effective dissipation of heat, aluminum is used in the heat sink inside the LED flood light. Being a good conductor aluminum can dissipate heat more easily. Giving these lights better durability.
Ultra Wide Angle Lens
These LED flood lights come with an ultra-wide-angle of 150 x 85 degrees to provide flood illumination in large areas and outdoor spaces. This beam angle is idle for a general area or sight lighting.
Premium LED Chips:
Customer satisfaction is our first priority so we ensure the best quality of products by using premium LED chips from Epistar. The chip is embedded inside our LED flood light fixture in such a way that it produces the highest operational efficiency.
The LED flood light comes with a CRI of 80 enabling objects and surfaces to look realistic and unartificial up to the extent of 70% in comparison to an ideal or natural light source.
Low-Cost Maintenance:
The LED flood lights are extremely low maintenance because of the latest LED technology that it uses. Moreover, with a low lumen depreciation, it functions flawlessly until the end of its lifespan.
Vibration Test Pass:
For the vibration testing the luminaire under the test is exposed to a certain vibration level and graded according to the national and international standards making it an important test of durability.
As DLC approved product, an LED flood light makes you eligible for a rebate.
Dimmable:
LED Flood Light can help you save extra on utility bills by using a dimmer. The flood lights can be dimmed from 1-10V, 0 being the 'maximum dimming' level and 10 the "lowest dimming" level. Our floodlights are compatible with most of the standard dimmers available in the market.
This product is compatible with the following dimmers. These dimmers work perfectly with our lights.
**For any other Dimmer please contact our customer support or check with your electrician.
| Beam Angle: | 150 x 85 Degree |
| Certifications: | UL, DLC Listed |
| Color Temperature (Kelvin): | 5700 Kelvin |
| Dimmable: | 1-10 Dimmable |
| Fixture Color: | Bronze |
| IP Rating: | IP65 Rated |
| Life Hours: | 50,000 Hours |
| MPN (Part No.): | FD030 |
| Replaces: | 1575 Watt Replacement |
| Voltage: | 100-277VAC |
| Wattage: | 450W |
| Brand: | LEDMyplace |
| Color Rendering Index(CRI): | >80 |
| Dimensions (L x W x H): | 28.22 x 14.13 x 3.74 Inch |
| DLC Listed: | Yes |
| Housing: | Aluminum |
| LED Type: | SMD3030 |
| Lumens: | 60750 Lumens |
| Power Factor: | 0.9 |
| SKU: | WEN-S-G07-450WCT3B2-BR3NP20SPFM57 |
| Warranty: | 5 Years |
| Operating Temperature: | -40 Degree F To 113 Degree F |
Be the first to ask a question about this.
