LED Stadium Lights, 300W, UL, DLC Approved, Waterproof, Stadium Flood Light For Backyard, Playground, Basketball Court
The 300 Watts LED Floodlights are perfect for outdoor as well as indoor spaces. They are available in 300 watts and emit 42000 lumens that provide ecstatic lighting to the area. With the color temperature of 5700 kelvin, they are IP65 rated for water-resistance. These lights come with the dimmable feature and can easily replace 1050 Watts conventional lights. The light fixture is UL and DLC certified, which makes it better than any other lights. This is a perfect replacement for 1050 watts traditional fixture. These floodlights are easy to install and are available with 120V - 277V voltages.
Features of LED flood Light
- Available Wattage: 300W
- Available Color Temperature: 5700K
- Luminous Flux: 42000 Lumens
- Wattage Equivalent: 1050W
- Mounting: U-Bracket
- IP65 Rated
- Lifespan: 50,000 hours
- Voltage: 120-277V
- UL, DLC approved
With the capability of being installed anywhere as an outdoor lighting fixture, an LED flood light provides you with more than one mounting option such as flood mounting or yoke mounting and knuckle mounting. The LED flood light can be installed in an upward or downward manner to achieve different beam angles. Since the mounting is easy and quick, in order to change the beam angle a user simply needs to loosen the thumb screw, move onto the desired position and then retighten the screw.
An IP65 Rating for Water-Resistance
LED Flood Light comes with an IP65 driver to withstand harsh weather conditions. The lighting fixture can resist ingress of dust, dirt or water from the water jet. Hence, our outdoor LED flood light can be used in locations where there are chances of dust, dirt and dampness. Not only does it sustain such harsh and fluctuating environmental condition but is tried and tested to operate under such a condition.
With a rugged aluminium casing on the outside, our outdoor LED flood light has the necessary durability to handle wind, dust, moisture or snow. With robust design and an aesthetic look, our outdoor LED flood light makes for a superior luminaire than any HID or metal-halide lamp.
Polycarbonate as an outer coating is used for our LED flood light to achieve an optimal lighting performance and durability. The polycarbonate imparts dimensional stability, resistance to withstand external heat and any other impact.
Thermal Heat Dissipation
The heat sink inside the LED flood light is made up of aluminium which being a good conductor heat can dissipate heat effectively and efficiently.
Ultra Wide Angle Lens
Our LED flood light has an ultra wide angle -- 160 degree for flood illumination of huge areas and wide spaces. This beam angle is not for the purpose of highlighting any specific object, rather it is for -- general area/sight lighting.
Premium LED Chips
Customer satisfaction is our first priority so we ensure the best quality of products by using premium LED chips from Epistar. The chip is embedded inside our LED flood light fixture in such a way that it produces the highest operational efficiency.
The LED Flood Light brings you extra energy-savings by being dimmable. It can be dimmed from 1-10V, 0 being the 'maximum dimming' level and 10 the "lowest level of dimming". Our flood light is compatible with most standard dimmers available in the market.
Low Cost Maintenance
The LED flood light needs very low maintenance because of the technology that it uses and a low lumen depreciation it undergoes until the end of its lifespan. Hence, a low maintenance cost.
Vibration Test Pass
The vibration testing is done for conduct dynamic measurements on a luminaire. For this, the luminaire under the test is exposed to a certain vibration level and tested as specified by national and international standards.
As DLC approved product, an LED flood light makes you eligible for rebate.
This product is compatible with the following dimmers. These dimmers work perfectly with our lights.
**For any other Dimmer please contact our customer support or check with your electrician.
|Beam Angle:||160*115° Beam Angle|
|Color Temperature (Kelvin):||5700 Kelvin|
|Safety Rating:||UL Listed|
|Certifications:||UL, DLC Listed|
|Dimensions (L x W x H):||13.4 x 22|
|IP Rating:||IP65 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||FD019|
|Replaces:||1050 Watt Replacement|
|Operating Temperature:||-40 Degree F To 113 Degree F|
Questions & AnswersAsk a Question
Do you have a tinted lense for this model? I installed several and have one or two that are just a little too bright. And to rewire the existing setup for the 0-10 dimming would be excessive
We are afraid, we do not carry tinted lens flood lights. In this case you can go for a lower wattage that would not put out more brightness as compared to 300 watt flood lights
what is the amperage of inrush current of fixture?
The inrush current should be less than 80A
Is it 220v?
yes these work with 100v - 277v
I bought this, but it’s not compatible with my current pole light. How can I get a different bracket?
we have different bracket and acessories on our website and you can also call us so we can suggest options