LED Flood Light - 42000 Lumens - High Voltage - 300 Watt - 1050W Equal - 5700 Kelvin - 200-480V - DLC Approved
These are the 300 watts LED Floodlights that emit Y lumens which are enough to illuminate the outdoor as well as indoor area. These area lights have a color temperature of 5700 kelvin and are a perfect lighting system with 200V-480V voltage. Superior to the spotlight, these lights can easily replace 1050 watts conventional light. These light fixtures are UL, DLC, CE and RoHS approved. With the 50,000 operational hours, these lights are highly durable. Very suitable for damp locations, they are IP65 rated. They are safe and simple-to-install.
Features of Exterior Security LED Flood Lights:
- Available Wattage:300W
- Color Temperature Available: 5700K
- Luminous Flux Available: 42000 Lumens
- Wattage Equivalent:1050W
- Lifespan - 50,000 hours
- Voltage: 200V-480V
- Mounting option: Flood Mount
- IP65 Rating - Suitable for Wet Locations
- UL, DLC Premium approved
- 5 years of Manufacturer's Warranty
LED flood lights are a versatile solution for all your outdoor lighting problems. These lights can be installed anywhere around your property. Comes with various mounting options such as flood or yoke mounting, and knuckle mounting. These LED flood lights can be installed in both upward or downward fashion to illuminate your outdoors at different beam angles. Mounting these lights is a simple process enabling you to do an easy and quick installation.
To change the beam angle a user simply has to loosen the thumb-screw, move the fixture onto the desired position, and then retighten the screw.
An IP65 Rating for Water-Resistance
LED Flood Light comes with an IP65 driver to withstand harsh weather conditions. The lighting fixture can resist ingress of dust, dirt or water from the water jet. Hence, our outdoor LED flood light can be used in locations where there are chances of dust, dirt and dampness. Not only does it sustain such harsh and fluctuating environmental condition but is tried and tested to operate under such a condition.
With a rugged aluminium casing on the outside, our outdoor LED flood light has the necessary durability to handle wind, dust, moisture or snow. With robust design and an aesthetic look, our outdoor LED flood light makes for a superior luminaire than any HID or metal-halide lamp.
Polycarbonate as an outer coating is used for our LED flood light to achieve an optimal lighting performance and durability. The polycarbonate imparts dimensional stability, resistance to withstand external heat and any other impact.
Thermal Heat Dissipation
The heat sink inside the LED flood light is made up of aluminium which being a good conductor heat can dissipate heat effectively and efficiently.
Ultra Wide Angle Lens
Our LED flood light has an ultra wide angle -- 120 degree for flood illumination of huge areas and wide spaces. This beam angle is not for the purpose of highlighting any specific object, rather it is for -- general area/sight lighting.
Premium LED Chips
We ensure highest quality of our products by having premium LED chips from Epistar. The chip is so embedded inside our LED flood light fixture in such a way that highest operational efficiency is ensured.
The LED Flood Light brings you extra energy-savings by being dimmable. It can be dimmed from 1-10V, 0 being the 'maximum dimming' level and 10 the "lowest level of dimming". Our flood light is compatible with most standard dimmers available in the market.
Low Cost Maintenance
The LED flood light needs very low maintenance because of the technology that it uses and a low lumen depreciation it undergoes until the end of its lifespan. Hence, a low maintenance cost.
Vibration Test Pass
The vibration testing is done for conduct dynamic measurements on a luminaire. For this, the luminaire under the test is exposed to a certain vibration level and tested as specified by national and international standards.
As DLC approved product, an LED flood light makes you eligible for rebate.
This product is compatible with the following dimmers. These dimmers work perfectly with our lights.
**For any other Dimmer please contact our customer support or check with your electrician.
|Beam Angle:||150x85° Beam Angle|
|Certifications:||UL, DLC Listed|
|Color Temperature (Kelvin):||5700 Kelvin|
|IP Rating:||IP65 Rated|
|Operating Temprature:||-4° F TO +113° F|
|Replaces:||1050 Watt Replacement|
|Color Rendering Index(CRI):||>70 CRI|
|Dimensions (L x W x H):||3.23x1.54x0.73|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||FD010|
Questions & Answers
Have a Question?
Be the first to ask a question about this.