The all-in-one design combined with the latest in lighting technology makes this LED solar street lights a class leader when it comes to protecting your immediate environment. The high power solar panel used in the LED solar street light offers 8-10 hours of continuous light off one full charge giving out a powerful light. With an inbuilt 230 WHr of battery, the solar street light has the capacity to maintain a balance between lighting and operational efficiency with minimum or no variable maintenance cost.
Available Wattage: 30W
Color Temperature Available: 2700-6500K
Luminous Flux Available: 3300-3800 Lumens
Beam angle: >145°
Lifespan: 30,000 hours
Voltage: 18VDC
IP Rating: IP66
Charging time: 8.5 Hours
Full power run time: 8-10 hours
Max run time: 29 hours
Battery : 230.4 WHr
CRI 70+ [High CRI]
Dimensions: 925.7*305.7*275.6mm
Replaces 300W incandescent or a 60W fluorescent
Operating Temperature: -4° F to 140° F
3 years of Manufacturer's Warranty
LED Solar Street light can be easily installed with the slip-fitter mounting option on a pole. This street comes with a single unit fixture, the solar panel, battery and LED light are integrated into a single unit and doesn’t require much effort and labor.
The LED solar street light doesn’t contain any harmful elements like mercury and lead. The eco-friendly LED chips and solar panel helps the fixture to use less energy and it reduces the demand from power plants and decreases greenhouse gas emissions.
LED lights are up to 80% more efficient than traditional lighting such as fluorescent and incandescent lights. 95% of the energy in LEDs is converted into light and only 5% is wasted as heat. This is compared to fluorescent lights which convert 95% of energy to heat and only 5% into light! LED lights also draw much less power than traditional lighting; a typical 84-watt fluorescent can be replaced by a 36 watt LED to give the same level of light.
The fixture comes with an inbuilt battery with 230 WHr with just 8.5 hours of charging time. The inbuilt battery works best between the temperature ranging -4° F to 140° F.
You get the full brightness of the LED solar street light when you turn it on, which is an advantage over HID fixtures which take approximately 15 minutes to give out the complete brightness.
The LED solar street light fixture is IP66 rated, it allows the fixture to function at its best at outdoors. The IP66 rating describes the capacity of the fixtures to resist moisture and dust that might cause the fixture to dysfunction.
The maximum run time for the LED solar street light fixture is 28 hours.
1. M1, Green indicator, 5H 100% brightness, then 5H 30% brightness + PIR (100%
brightness maintained for 30 seconds), then 70% brightness to dawn;
2. M2, Orange indicator, the brightness is constant at 70% to dawn;
3. M3, Red indicator, 30% brightness + PIR(100% brightness maintained for 30 seconds) to dawn;
Short press the button to switch the working mode from M1 to M2 or M3, and the
a corresponding indicator light will turn on for reminding.
This product comes with a beam angle that is too wide and not less than 120 degrees which is utilized for illumination of wide areas and huge spaces.
| Beam Angle: | >145° Beam Angle |
| Color Rendering Index(CRI): | >70 CRI |
| Dimensions (L x W x H): | 36.4x12.03x10.8 |
| Height: | 10.8 |
| IP Rating: | IP66 Rated |
| LED Type: | SMD3030 |
| Life Hours: | 30,000 Hours |
| Lumens: | 3800 Lumens |
| SKU: | WEN-SLSL01-30W30AA1-57K |
| Voltage: | 18VDC |
| Wattage: | 30 Watt |
| Brand: | LEDMyplace |
| Color Temperature (Kelvin): | 2700-6500 Kelvin |
| Fixture Color: | Silver |
| Housing: | Aluminum |
| LED Brand: | SEOUL |
| Length: | 36.4 |
| Light Distribution: | 126.6LM/W |
| MPN (Part No.): | SL010 |
| UPC: | 719034340142 |
| Warranty: | 3 Years |
| Operating Temperature: | -4 Degree F To 140 Degree F |
Be the first to ask a question about this.
