Ballast Compatible T8 4ft 20W LED Tube Light 2800 Lumens 5000K Frosted (Check Compatibility List; Not Compatible with all ballasts)
4ft LED Tube - 2800 Lumens - 20 Watt - 70W Equivalent - 5000 Kelvin - Frosted - Ballast Compatible
The 4ft. LED tube glass of 20W available in 5000K color temperature and having a CRI of >80 can deliver lumens up to 2800. It is an excellent substitute for T8, T10 & T12 fluorescent tubes. This 20W can safely and easily replace a fluorescent tube of 70W and bring an energy-savings of 50W. Thus, a lower utility bill for you every month. This 20W will work with a ballast, hence the LED tube can simply be inserted after taking out the existing fluorescent tube. These 20W LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. For the standard ceiling height, these LED Tubes having a beam angle of 180-degree emit enough bright light, have a long lifespan, and have a shatterproof coating, unlike the fluorescent tubes that were of inferior light quality, typically low lifespan, and usually with no shatterproof. One of the best things about LED tubes from LEDMyPlace is they are ETL & DLC listed, these listings make you eligible for a handsome rebate along with 5 years of warranty.
Features T8 4ft 20W LED Tube Light
- Available Wattage: 20 Watt
- Available Size: 4ft
- Available Color Temperature: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Wattage Equivalent: 70W
- Lifespan - 50,000 hours
- Ballast Compatible [not compatible with every ballast. please ask for a compatibility list]
- Voltage: 100V - 277V
- ETL, & DLC approved
- 5 years of Manufacturer's Warranty
This LED tube requires a ballast bypass and they need to be directly wired into the socket for line voltage.
For ‘direct wiring’ of this LED tube, you can either remove the ballast or bypass the ballast. And, you must make sure that you remove the shunted sockets, in case you don’t have the non-shunted sockets as the T8 LED tubes can only work with non-shuntd sockets.
The best thing about ballast bypass LED tubes is that you don’t need to worry about any failure of the ballast and hence there is neither the hassle of maintenance or replacement everytime the ballast fails nor any costs to incur.
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
The LED tubes accepts an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
180 Degree Beam Angle
The 180 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 180 degree beam angle.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for rebate.
|Color Rendering Index(CRI):||80 CRI|
|Dimensions (L x W x H):||47.75 x 1.15 x 1.32|
|Housing:||Aluminum + Plastic|
|Light Distribution:||130-140 Lm/W|
|MPN (Part No.):||TB026|
|Replaces:||70 Watt Replacement|
|Wiring:||Single Ended Power / Double Ended Power|
|Beam Angle:||180° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|DLC Model no.:||WEN-T8-20P4FT-AB-F(5000K)|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|Operating Temperature:||-68 Degree F To +122 Degree F|
Questions & AnswersAsk a Question
If you remove ballast and wire direct is there a benifit such as energy consumption? Also if wired through ballast and ballast fails will the light still work or will you have to wire direct at that time ?
Yes, there is a saving on energy consumption if you remove the ballast. If the ballast fails during use, the light will not work until you direct wire it.
This product says compatible with MOST ballasts, so will it simply NOT turn on if it doesn't work with our type of ballasts or will it blow the bulb?
it wont damage the bulb , it will either come on kind of dim or wont come at all