T8 8ft. LED Integrated Tube - 7200 Lumens - 60 Watt - 210W Equivalent - 5000 Kelvin V Shaped- Frosted
Light up your indoor areas by using this T8 8ft LED Integrated Tube which comes in 60-watt power. The light gives out 7200 Lumens and has a rated operational life of more than 50,000 hours. This means that these lights will last for more than a decade even if used for 12 hours of the day. The light has a frosted cover and comes in the color temperature of 5000 Kelvin. The light has a beam angle of 180° and has an aluminum housing.
Features of 60 Watt V Shaped LED Integrated Tube, T8 8ft. 5000 Kelvin
- Available Wattage: 60W
- Available Color Temperature: 5000K
- Luminous Flux: 7200 Lumens
- Wattage Equivalent: 210W
- Lifespan - 50,000 hours
- Voltage: 100V - 277V
- Lens: Frosted
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
T8 8ft LED Integrated tube is a linkable integrated fixture and can be linked using a linkable connector directly. During installation, you will find two white cables for L or N and yellow for the ground; using these wires also integrated tubes can get connected. You can mount this fixture by placing the clip kits and screws correctly. Then fix the tube to the ceiling or wall. Once you get done with the tube fixing, connect the power cord (Sold Separately) to the tube.
Easy to Plug and Play
Our T8 8ft integrated tube doesn’t require any ballast unlike in case of fluorescent tube when such tube required removing of the ballast and which took substantial amount of resources both in terms of labor and time. Earlier, it was often easier to install a new 8ft integrated tube than to retrofit the fluorescent tube when you struggled with the issue of ballast compatibility. But, now, with T8 8ft integrated tube, you can heave a sigh of relief as all you need to do is replace the fluorescent tube with our integrated tube by directly wiring it to the line source and without undertaking any step of ballast removal.
With fluorescent tubes, you often encountered the problem of flickering on a consistent basis and then you helplessly tried to fix it in some or the other way, sometimes by fixing the loose tube in its place, at other times, replacing the starter. Fortunately, this isn’t the case with our T8 8 ft LED integrated tubes. Our 8ft integrated tube is completely flicker-free since it operates without any starter and thus this tube is a time-saving lighting product when you can safely rely on it without your regular activity getting disrupted.
Our T8 8ft LED integrated tube accepts an input voltage of AC 100-250. With an LED driver inside the tube that can adjust according to the incoming voltage to provide the current supply, this voltage range allows you to directly wire the fixture without making any modifications.
Low Maintenance Cost
With our T8 8ft integrated tube lasting for not less than 50,000 hours and with very little lumen depreciation until the end of the lifespan, you incur no cost or almost negligible maintenance cost.
>50,000 Life Hours
Our T8 8 ft integrated tube by all means are built to last for more than 50,000 hours, thanks to the innovators of LED technology.
The CRI being 80 for integrated tube means it enables objects and spaces to display their true colors to 80% extent and this is what makes it suitable to different applications.
180 Degree Beam Angle
The integrated tube having this wide beam angle can be used for general area lighting and for illuminating large areas. For integrated tubes installed in low ceiling rooms, this beam angle is perfect.
The integrated tubes by all means do not bring any less than 75% savings in energy when making a switch from fluorescent tube to this tube.
Aluminium Heat Sink
The heat sink allows our T8 8ft integrated tube to dissipate any heat produced by the tube. This heat sink made of aluminium is light weight and a good thermal conductor.
The Operating Temperature of these LED Integrated Tubes is -4°F to 104°F which is -20°C to 40°C. These LED Integrated Tubes to perform very well in these temperatures.
IP 40 Rated
Our integrated tube is rated IP40 indicating that the tube is protected against any dust particles with thickness greater than 1mm and any moisture or water coming from any direction. This makes our tubes suitable even for those indoor areas where there are chances of penetration of water such as bathrooms, kitchens etc.
LEDMyPlace uses LED chip of highest grade, made available to us through the largest manufacturer of LEDs -- Epistar Corporation. The LED chip being manufactured out of high quality materials is durable, low heat generating and eco-friendly with a long service life.
|Color Rendering Index(CRI):||>80 CRI|
|Damp Location:||Damp Location|
|Operating Temprature:||-4°F to 104°F|
|Replaces:||210 Watt Replacement|
|Beam Angle:||180° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||96|
|IP Rating:||IP40 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||IT001|
Questions & AnswersAsk a Question
Are these lights dimmable?? We are looking to purchase 20-30 of them to replace the 8' clear units that we purchased about two years ago and hung 10' directly above work cubicles. We are getting a lot of complaints about head ackees due to the direct light of the led. So we are looking to replace them with these. Please let me know.
Hello, unfortunately none of our tubes are dimmable but we do carry these in Frosted style which helps diffuse the light a bit.
How many of these can be connected on the same circuit in the United States?
Up to 4, for 240W.
What is included with the 10 pack? Do they come with connections so you can daisy chain them?
The 10-pack comes with 10 tubes. Each tubes has a 13in long pigtail for hard-wiring, a 1ft connecting cable for daisychaining, and a clip set. You can connect up to 4 (240W) of these 8 footers together.
how do you wire the lights to the wires already in the shop. I have black , white and bare copper wires but they don't match the wires on the new lights.
Please refer to product images for wiring instruction on website, you can reach our customer support on 815-697-5223 for further assistance.
Are these lights 110 volts
They run on the voltage range of 100-277V
Is there any warranty on these lights? I have bought 2 already and plan to buy 20+ but had question come up yesterday about warranty. I do not see any reference to that on here and there wasn't anything in the package on the two I already purchased.
Yes, these fixtures come with a 5-year hassle free warranty.