HYBRID T8 8FT LED TUBE LIGHT - WATTAGE ADJUSTABLE & CCT CHANGEABLE OPTION, TYPE A+B, FOR GARAGE WAREHOUSE OFFICE STORAGE AREAS RETAIL SPACES HOSPITALITY
Discover our versatile T8 8ft LED Tube/Bulb, offering adjustable wattage options of 48w, 40w, 36w, and 32w to suit your energy needs. With an impressive 130lm/w, it delivers efficient illumination.
Tailor your lighting with CCT changeable options from warm 3000k to cool 6500k, making it ideal for various settings. The frosted design provides a soft and diffused light.
This FA8 Single Pin tube is double end powered and requires a simple ballast bypass, suitable for garage, warehouse, office, storage areas, retail spaces, and hospitality environments. It's a versatile lighting solution for a brighter, more efficient space. Upgrade now!
This hybrid T8 LED tube light offers versatile installation options, as it can be used with both Ballast Compatible and Bypass wiring configurations. This flexibility allows you to easily replace your existing fluorescent tubes without the need for complicated rewiring, making the transition to energy-efficient LED lighting a hassle-free process. Whether you prefer the convenience of using the existing ballast or want to bypass it for greater energy savings and control, this LED tube light gives you the freedom to choose the best option for your lighting needs.
Flicker Free
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
IP22 Rated
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
Voltage Input
The LED tubes accepts an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
CRI >80
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
The 120 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 degree beam angle.
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.
Specifications
Base Type:
FA8
Brand:
WEN
Color Rendering Index(CRI):
>80 CRI
Dimensions (L x W x H):
93.81 x 1.15 x 1.32
DLC Listed:
Yes
Housing:
Aluminum + Plastic
LED Type:
2835
Light Distribution:
130-140 Lm/W
MPN (Part No.):
TB059
Replaces:
140 Watt Replacement
Voltage:
100-277 Volt
Wattage:
48 Watt
Beam Angle:
120° Beam Angle
Certifications:
ETL, DLC Listed
Color Temperature (Kelvin):
4000 Kelvin
Dimmable:
Yes
DLC Model no.:
WEN-T8-40P8FT-FA8-F(4000K)
IP Rating:
IP22 Rated
Life Hours:
50,000 Hours
Lumens:
4160 Lumens- 6240 Lumens
Power Factor:
>0.9
SKU:
WEN-T8-48P8FT-FA8-FMM-F
Warranty:
5 Years
Operating Temperature:
-68 Degree F To +122 Degree F
Product Review
Timothy A.
lights are very good and bright
Tony C.
Real nice, Clark.
Denece P.
Perfect for my home office.
Jock R.
The packaging was fine and tubes work great.
mabry p.
I have dealt with this company for several years and highly recommend them . Fast shipping and easy to deal with. Product comes well packed and damage free.
Ben K.
excellent product!! great price!! fast shipping!!
Chris
They work!!
Lloyd M.
These LED’s should satisfy any user. Each tube is wrapped in plastic and then, an outer covering. The colors, (kelvin) and brightness will brighten any room or area!
Nathan B.
I purchased 10 lamps, including two spares. Of the eight I installed, four had color temperature and power level switches that were difficult to move. On one of the lamps, the power level switch would not move at all. Fortunately, it was on the setting I wanted. Other than the switch issues, I'm very happy with the light output. They're a huge improvement over the 110 W T12 HO lamps previously installed.
Arnold d.
They are bright and were easy to remove the ballast and install the tube. It's only been a week so I hope the tubes last long and don't cause problems later.
Donald S.
LOVE THE ADJUSTMENTS. QUICK DELIVERY ALSO
Thomas E.
Easy to order, quick shipping, and the lights work great.
Like the ability to change the wattage and color of the light.
Gregory B.
So much brighter with half of the power! I replaced 12 fluorescent bulbs and bypassed the ballast resistors that were loud and failing, especially in the cold, with these LED tubes that are silent with no flicker. I didn't realize how annoying the old bulbs were, until I changed.
The clips supplied are needed since the 8 foot long LED tube is not quite stiff enough to support it's own weight without sagging a little, but the clips are not quite tall enough so there is an ever so slight curve, but is minor to the overall look.
The price is so reasonable now that the LED tubes will pay for themselves in about a year since the power consumption is half.
I also bought other great products, like 2 light bar fixtures, that are wonderful.
Courtney
Great bulbs! Very bright. Fast and secure shipping and handling.
Billy J.
Worked good
Paul E.
my first led bulbs, there alot better then fluorescent.
Rodney B.
Was easy to install since i know about electrical stuff, did it all my self, i will be buy again from u to update more lighting
Deana C.
Product arrived fast. Each tube being packaged individually was great.
My brother-in-law helped us with the wiring that needed to be done as we changed from florescent tubes to these LED tubes . We are totally impressed with your product.
Matt D.
It’s user-friendly easy to sell on time shipping
John M.
I tried to order LED replacement tubes for my eight foot florescent fixtures from Amazon and it was a mess. The fixtures did not come and my money was returned. I tried Home Depot And my favorite local hardware store and got nowhere. So I went to the internet and ordered them from MyLEDplace. They were promptly delivered at no cost and they worked great. My installer screwed up two and MyLEDplace actually took the situation into consideration. I ordered online, later I called for more and talked to a helpful human. And each tube was a dollar less than any other price for a comparable light tube.
John M.
Fast and easy.
Karl P.
I replaced a bunch of 8' fluorescent tubes in my basement with these - now they're all the same color, (and a much nicer color at that) brighter, I've resuscitated fixtures in which the ballasts had gone bad by bypassing them, and theoretically I'll start saving money on my electric bill! (It's too early to tell - just made the swap last week.) The process of bypassing the ballasts was simple enough, and I did 8 fixtures in a few hours. I'm very happy I did this.
George B.
Works great, very bright, easy to install. 8ft LED needed one clip at the center for support.
Bill F.
These LED tubes are great. Easy to work with and are perfect lighting for our living room.
ronald b.
The 2 LED bulbs were brighter than 4 fluorescent tubes
Richard .
I converted all my fluorescent fixtures to LED‘s. I love them.
Ron R.
I replaced most of the lights in my garage and the light output was so good i didn't do the roof lights. No need. However about a year later having dead florescent fixtures drove me nuts so i did those too.
KENNETH R.
bright
John R.
Retrofitting the 8 ft. LED Tubes is way easier than messing with double 4 ft. tubes with adapters. I like lots of light in my garage workshop. The 4000K LED tubes are much brighter than the "Cool White" fluorescent tubes they replaced. Overall, I'm very pleased with this purchase.
Matthew L.
replaced 1970's lights with these LED's. Much brighter, instant on and no buzz in the cold, Simple wiring change in the fixtures and they worked perfect. Very happy.
Ken S.
Ordering LEDS WAS PAINLESS
RECIEVED ITEMS AS TOLD 4 DAYS,PREPARED Light fixtures while I Waited .Let there be Light!!!. Awsome! Thank you so much for all the help in selecting the color and brightness and Ease of Ordering.
Ken.S
Michael N.
Shipping was very fast. Clear instructions on how to wire lights. Easy to install. Where once was 2-75, or 2-90 watt florescent tubes now are 2-40 watt LED tubes in each fixture. Lights are much brighter than I expected,(see pictures). I had to go back and use 1-40 watt tube in each fixture. I used 1-40 watt 8 ft 4000 lumens single pin 4000K frosted and the brightness is equal to 2-75 watt florescent tubes. LED tubes came packaged individually in cardboard tubes in a case of 16, and since I am only 8 tubes the other 8 can be stored safely till I need them in about 5 years.
Retrofitting the 8 ft. LED Tubes is way easier than messing with double 4 ft. tubes with adapters. I like lots of light in my garage workshop. The 4000K LED tubes are much brighter than the "Cool White" fluorescent tubes they replaced. Overall, I'm very pleased with this purchase.
Ordering LEDS WAS PAINLESS
RECIEVED ITEMS AS TOLD 4 DAYS,PREPARED Light fixtures while I Waited .Let there be Light!!!. Awsome! Thank you so much for all the help in selecting the color and brightness and Ease of Ordering.
Ken.S
Shipping was very fast. Clear instructions on how to wire lights. Easy to install. Where once was 2-75, or 2-90 watt florescent tubes now are 2-40 watt LED tubes in each fixture. Lights are much brighter than I expected,(see pictures). I had to go back and use 1-40 watt tube in each fixture. I used 1-40 watt 8 ft 4000 lumens single pin 4000K frosted and the brightness is equal to 2-75 watt florescent tubes. LED tubes came packaged individually in cardboard tubes in a case of 16, and since I am only 8 tubes the other 8 can be stored safely till I need them in about 5 years.
I have dealt with this company for several years and highly recommend them . Fast shipping and easy to deal with. Product comes well packed and damage free.
These LED’s should satisfy any user. Each tube is wrapped in plastic and then, an outer covering. The colors, (kelvin) and brightness will brighten any room or area!
I purchased 10 lamps, including two spares. Of the eight I installed, four had color temperature and power level switches that were difficult to move. On one of the lamps, the power level switch would not move at all. Fortunately, it was on the setting I wanted. Other than the switch issues, I'm very happy with the light output. They're a huge improvement over the 110 W T12 HO lamps previously installed.
They are bright and were easy to remove the ballast and install the tube. It's only been a week so I hope the tubes last long and don't cause problems later.
So much brighter with half of the power! I replaced 12 fluorescent bulbs and bypassed the ballast resistors that were loud and failing, especially in the cold, with these LED tubes that are silent with no flicker. I didn't realize how annoying the old bulbs were, until I changed.
The clips supplied are needed since the 8 foot long LED tube is not quite stiff enough to support it's own weight without sagging a little, but the clips are not quite tall enough so there is an ever so slight curve, but is minor to the overall look.
The price is so reasonable now that the LED tubes will pay for themselves in about a year since the power consumption is half.
I also bought other great products, like 2 light bar fixtures, that are wonderful.
Product arrived fast. Each tube being packaged individually was great.
My brother-in-law helped us with the wiring that needed to be done as we changed from florescent tubes to these LED tubes . We are totally impressed with your product.
I tried to order LED replacement tubes for my eight foot florescent fixtures from Amazon and it was a mess. The fixtures did not come and my money was returned. I tried Home Depot And my favorite local hardware store and got nowhere. So I went to the internet and ordered them from MyLEDplace. They were promptly delivered at no cost and they worked great. My installer screwed up two and MyLEDplace actually took the situation into consideration. I ordered online, later I called for more and talked to a helpful human. And each tube was a dollar less than any other price for a comparable light tube.
I replaced a bunch of 8' fluorescent tubes in my basement with these - now they're all the same color, (and a much nicer color at that) brighter, I've resuscitated fixtures in which the ballasts had gone bad by bypassing them, and theoretically I'll start saving money on my electric bill! (It's too early to tell - just made the swap last week.) The process of bypassing the ballasts was simple enough, and I did 8 fixtures in a few hours. I'm very happy I did this.
I replaced most of the lights in my garage and the light output was so good i didn't do the roof lights. No need. However about a year later having dead florescent fixtures drove me nuts so i did those too.
replaced 1970's lights with these LED's. Much brighter, instant on and no buzz in the cold, Simple wiring change in the fixtures and they worked perfect. Very happy.