4ft LED Tube, 18Watt, 4000K, Ballast Bypass, UL cUL Listed, Commercial LED Tubes
The 4ft LED Tube of 18W while delivering a significant amount of lumens can replace any T8, T10, or T12 fluorescent tube fixture of 50W and bring incredible energy savings. This product with a beam angle of 220° and 4000K (cool white light) color temperature works great for any commercial or industrial setting. the tube can provide for even and uniform lighting. his tube can work with & without a ballast. kindly check the ballast compatibility list. Being hybrid in design, this tube can work with or without the existing ballast. The UL, DLC listing ensures the complete safety of product use. You have a completely hassle-free manufacturer’s warranty for at least 3 years on this product.
2400
Lumens
50,000
Hours
>220°
Beam Angle
120-277V
Voltage
18
Features of 4ft LED Tube, 18Watt, 4000K, Ballast Bypass, UL cUL Listed, Commercial LED Tubes
Some LED tubes are hybrid tubes or Type A+Type B in which case these tubes are flexible to work with the ballast or work without the ballast. They can be wired directly if there is a need for ballast bypass and can be plugged-in after removing the existing fluorescent tube fixture if it is found to be compatible with the existing ballast.
Flicker Free
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
Voltage Input
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
CRI >80
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
220 Degree Beam Angle
All our LED tubes which come in glass have a 220-degree beam angle. This beam angle is used for very huge spaces and wider areas.
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from any number of chips to ensure high performance and reliability.
Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
Tube Installation
Specifications
Beam Angle:
>220° Beam Angle
Brightness:
2400 Lumens
Certifications:
UL, RoHS Listed
Color Temperature (Kelvin):
4000 Kelvin
DLC Listed:
Yes
Height:
1.02
LED Type:
SMD LEDs
Lumens:
2400 Lumens
MPN (Part No.):
TB016
Safety Rating:
UL, RoHS Listed
SKU:
WEN-T8GABUL1218T-40-A
Voltage:
120-277V
Wattage:
18
Operating Temperature:
-4 Degree F To +113 Degree F
Brand:
LEDMyplace
CCT:
4000 Kelvin
Color Rendering Index(CRI):
>80 CRI
Dimensions (L x W x H):
47.76*1.02*1.02
Fixture Color:
Cool White
IP Rating:
IP20 Rated
Life Hours:
50,000 Hours
Metal Halide Equal:
50 Watt Replacement
Power Factor:
≥0.9
Shape:
Tube
UPC:
719034338200
Warranty:
5 Years
Weight:
0.2 lbs
Product Review
Terry D.
as advertised
Eric S.
It’s package very good. They are Solid good led tubes. Nice and bright!
Aaron W.
Great lights
Joseph F.
What struck me the most was the excellent packaging and on-time delivery.
Quick shipping. Very well packed. Just as described. Immediate light upon turning on. Nicely diffused light. Nice fit and finish of the product. Even had protectors on tube prongs. Excellent quality all around.
I have 14 light fixtures 8 foot long and I’ve only rewired 8 fixtures and only used one LED bulb in each fixture and I have way more light than when I had 2 fluorescent bulbs in the light fixtures. I’ll be buying another set of 10 bulbs for the remaining fixtures and keep a couple on hand for spares.
First fixture in this room just to show the difference for the next two. I have purchased 60 of the 96T8 5000k frosted lamps and very please with the retrofit of the 1953 fixtures.
I ordered 10 8ft led lights. The shipment arrived on time and very well packaged. I was able to bypass the ballast easily and had all 10 lights working in less than 2 hours. I highly recommend this product. Now I just need to see how long they last. The light is cleaner and brighter than my old HO florescent bulbs.
Many of the 8ft. flourescent lights in my garage were starting to die. Not just the bulbs but the ballasts too. So I figured it was time to switch over to LEDs. The flourescent bulbs were all 100 watt high output bulbs. I replaced them with these 48W LEDs. After bypassing the ballasts and installing the center supports I fired them up and was very pleased. The light output is roughly equal to the flourescent bulbs that were in there before and the whiter light is good for working in the garage. I prefer a warm white light in the house so was worried that this 5000K light would be too much. But for a garage I think I like it. Great product, they seem well built and the 8 bulbs I have installed so far work great.
Very easy to install (less than 30min per fixture including ballast bypass wiring), looks nice and greater light output than HO 110W fluorescent tubes and <50% energy consumption. Hoping all I purchased work this well and last as long as advertised.
The 8 foot LED conversion is a major upgrade to the lighting in our shop. Reasonably priced considering the shipping is included. These things are packaged like king tut. The box was a little rough, but the quality packing inside resulted in no damage.
Highly recommended product.
Store owner replied:
Hi Roger, Thanks for the positive feedback about our T8 LED Tube Lights! We're so glad to hear that they meet your needs and expectations.
Much brighter and uses less energy and cooler than fluorescent bulbs. Very easy to convert S well.
This is the second retail location we are outfitting with this product. It has helped save thousands in electric bills and they are very bright. Best ones I've found.
I just added (6) 8' fixtures to our shop on the farm using the 8', 48 watt, 6720 lumen clear bulbs from LEDMYPLACE.com. These bulbs add so much extra light to our truck bay in this 66'X90' shop. LEDMYPLACE has been my go to distributor for LED tube lights for several years now and I recommend to everyone I know who's looking at switching over to LED lighting.
The 8’ led lights are very bright and easy to rewire fixtures for them. Sure wish I’d found these before I took 8 fixtures down inside my shop and replaced them with 4’ , 6 bulb fixtures. Would have saved a lot of time and would have saved a bunch of money.
New tubes arrived packaged very well and in individual tubes also!!
Fit in my fixture perfectly! They come on at full brilliance immediately, even at 20 degrees!!
Very impressed! Excellent value!
Being a retired coal miner, I'm use to working in the dark. But, now when I'm working, I want light, and lots of it!! My garage has 6, double 8 foot florescent fixtures in it. They we good 6 years ago when I build the garage but over the years I've changed tubes, ballasts and got use to the buzzing and flickering. Also seemed to be getting dimmer over the years. I put a couple 4 foot LED shop lights in my gun room above my reloading bench and work bench and love them. That's what gave me the idea to upgrade the garage lights. Did a lot of research and had a lot of questions. Your site was very helpful and after a call to AJ, all my questions were answered and he made sure I ordered the correct tubes. My order arrived quickly, very well packaged and instructions provided. The day before they arrived, I had bypassed and removed the ballasts and replaced the covers and cleaned the lights. I told you I was use to working in the dark!! Next morning installed the new tubes and flipped the light switch and actually laughed out loud! The difference is like night and day, pun intended!! Highly recommend LEDmyplace and will not hesitate using them for my future lighting needs. I'm no photographer and this picture don't do my new lights justice. I'm a very happy man! Thank you for providing a great product at a fair price!!
It’s very simple you cut the wires off the ballast remove the ballast, bring all the wires together on one side of the fixture connect them to your neutral or white wire on the other side collect all the wires and connect them to your black wire. Plug and play after that
There is 12 double tube 8 ft. fixtures in my shop. Over the years I've gone through several bulbs and had to replace some ballasts. After another ballast gave out it was either keep replacing or go L.E.D.. I replaced all 24 bulbs, will never have to replace a ballast again, and spent less than it would have cost me to replace those by themselves.
Instant on, no noise from the fixtures and absolutely incredible light. These not only have doubled the amount of light in my shop but have also already saved me $30.00 on my last months electric bill.
Thank you for a great product. Will buy again for my barn lights.
The price and the quality of the product was great. The product that I bought works well with the ballast or without. I’m sure I will order more and I’m about to place an order!!
Light exceeded my expectation. It was a replacement for an other brand, that had some inoperative LEDs. The light output is much better than the previous one had when it was new.
I will be purchasing more of these in the future.
I only put these in one of 26 fixtures to try them. My fixtures are 14 ' 6" off the floor and wanted to see if the light would go that far. The only problem I had is these LED tubes are 5/16" longer than the HO fluorescent tubes I removed. I had to make adjustments to the fixture and barely got them in. I plan to convert the remainder of one row ( 6 more fixtures ) to be sure they make enough light.
These lights light up our factory so well. its like having windows on all sides. they are easy to install. i would recommend these to and factory or warehouse wanting better light.
These bulbs are an exact fit and were a breeze to install. Our factory is very bright and well lit.
We went from a 1500w - 3000k bulb to a 2400w- 6500k. Wow what a difference. Our employees have told me that they can see defects and paint fades a lot better. I would recommend these to any factory or warehouse wanting to up grade there lighting.