8 ft LED Tube - 5600 Lumens - 40 Watt - 140W Equivalent - 6500 Kelvin - Clear - Single Pin
Out of the LED tube, 8ft can be considered as the brightest LED tube because of its ability to deliver a higher lumen output to serve larger applications and higher energy efficiency than what you get with the other sizes. While our 8ft LED tube is available in 40W can deliver 5600 lumens. Having a beam angle of more than 180 degrees, the 8ft LED tube has 3-4 times longer lifespan than the fluorescent tubes, considering the longest lifespan of any fluorescent tube as 15,000 hours. This 8ft LED tube works without ballast and hence the ballast must be bypassed. With an excellent heat dissipation system, this 8ft LED tube is designed to work smoothly and for as long as the tube lasts. The 40W 8ft LED tube can easily replace 140W of any fluorescent tube and you get 75% of energy-savings when making a switch.
As an ETL-listed product, the 8ft LED tube is high on safety. You have a completely risk-free 5 years of warranty from the manufacturer’s end when you make an 8ft LED tube as your lighting choice.
Features of T8 8ft 40W LED Tube Light 5600 Lumens Single Pin 6500K Clear
- Available Wattage: 40W
- Color Temperature: 6500K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 180 degree
- Wattage Equivalent: 140W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, & ROHS Approved
- 5 years of Manufacturer's Warranty
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
180 Degree Beam Angle
The 180 degrees or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 180 -degree beam angle.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from any number of chips to ensure high performance and reliability.
|Color Rendering Index(CRI):||>80 CRI|
|Dimensions (L x W x H):||93.81 x 1.15 x 1.32|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|Replaces:||140 Watt Replacement|
|Beam Angle:||180° Beam Angle|
|Color Temperature (Kelvin):||6500 Kelvin|
|Housing:||Aluminum + Plastic|
|Light Distribution:||130-140 Lm/W|
|MPN (Part No.):||TB055|
|Operating Temperature:||-68 Degree F To +122 Degree F|
Questions & AnswersAsk a Question
How can I know if I have shunted sockets?
Shunted sockets means there is only 1 hole, port for a wire to go through, which you will for sure have if you have traditional LEDs, wired with Hot on one end, Neutral on the other. I've attached a picture below if you click the text;
Will these bulbs work outside in a sign?
Yes! As long as the ballast in the fixture is removed, and these are wired as double-ended power with a single-pin compatible tombstone.
Is this products com HO
We do have the same light in HO model as well. Please type TB051 in search box and hit enter to get to the HO model.
Will the lights work at 35 F degrees ?
It's operating temperature is -4° F TO +113° F
Will these bulbs replace a t12 bulb?
yes they can , you need to bypass the ballast though
Will these work in a t12 4 bulb fixtures
Yes they will, however you will need to bypass the ballast
Do I need to change the single pin bulb sockets with the LED bulbs?
no you can use it with your existing sockets
I want to replacef96 t12 dx 75 watt with led tube.What do you reccomend
We recommend you to replace this Led light WEN-8FT-40W-FA8-5000K-F